5 STAGE REVERSE OSMOSIS WATER FILTER WITH PERMEATE PUMP ERP-500
Titan Water Pro 5 Stage Reverse Osmosis Water Filter System 50GPD with Permeate Pump ERP 500
• Stage 1 Sediment Water Filter 5 Micron
• Stage 2 Coconut Shell GAC Water Filter
• Stage 3 Carbon Block Water Filter 5 Micron
• Stage 4 Reverse Osmosis Membrane 50 GPD
• Stage 5 Alkaline ph. Plus Filter
Stage 6 Post Carbon (Taste & Odor removal) -
This unit includes a Permeate Pump - Aquatec ERP 500
Features and benefits of Permeate Pump
Requires no electricity, powered by energy
The original Permeate Pump (ERP 500) is a simple, yet revolutionary, device. Powered only by the hydraulic energy of brine water usually lost to the drain (i.e. no electricity required), the Permeate Pump forces product water into the storage tank, reducing membrane back pressure and maximizing available feed pressure. These pumps dramatically improve the efficiency of R.O. water production, reducing waste water by up to 80%. . Permeate Pumps can also bring storage tanks up to line pressure and then shut the system down when these tanks reach capacity, eliminating the need for a hydraulic shut-off valve. Other benefits include higher delivery pressures, faster R.O. water production, superior water quality, and extended filter/membrane life.
From Brine Water:
Improves recovery rates by as much as 400%• Reduces waste water by as much as 80%• Enhances contaminant rejection• Ideal for membranes rated from 10-100 GPD• Effective for inlet water pressure as low as 30 psi• Increases membrane life, lowers “TDS creep”• Fills product tank up to 4 times more rapidly• NSF approved (Standard 58)
This system also comes with the following:
Reverse Osmosis faucet
Feed water adapter 1/2" MIP x 1/4" FIP x 1/4" tube Quick Connect
Saddle drain valve 1/4" Quick Connect
RO Faucet Standard Non Air Gap
Tank Valve
Housing Wrench
Check valve on the membrane product water side
Color coded tubing for easy installation
Installation Guide will be send via email
Complete and ready for your DIY Installation
Super Efficient RO Water Filter System.
Reverse Osmosis storage tank 9.2G - PAE-TP35
Specifications:
- Stainless steel water connection
- High-grade chlorobutyl diaphragm
- Virgin polypropylene liner
- Two part epoxy primer, polyurethane paint finish
- NSF-58 and CE approved
- Also known as PAE TKE-TP35
A tank shut-off valve is necessary to connect the tank to your reverse osmosis system and control the flow of water into and out of the tank. The valve is also essential for performing system service or maintenance.
For optimal performance, it is necessary to keep a pre-charge of approximately 7 psi in your tank.
Product Weight & Dimensions | |
---|---|
Height W/O Stand |
21.1" |
Product Height |
11 |
Product Length |
18 |
Product Width |
11 |
Shipping Box Volume (Cubic Meters) |
0.056 |
Product Weight |
14 lbs |
Shipping Weight & Dimensions | |
Shipping Length |
20 in. |
Shipping Width |
13 in. |
Shipping Height |
13 in. |
Product Details | |
Air Valve Stem Location |
Bottom |
Application |
RO Water Storage |
Capacity |
5.5 Gallons @ 40 psi |
Diaphragm Materials |
Butyl Rubber |
Inlet/Outlet Connection |
1/4" MPT, 3/4" MPT |
Inlet/Outlet Location |
Top |
Material Of Construction |
Stainless Steel |
Max Pressure (Psi) |
100 |
Size |
1/4" |
Tank Pre-Charge |
6 PSI |
Volume |
9.2 Gallons |
Connection Type |
Male (MPT) |
Diameter |
12-1/2" |
Origin |
Taiwan |
Certifications |
NSF Certified to Standard 58 |