RO Reverse Osmosis Water Filter System 1000 GPD 1:1 Ratio High Flow

Membrane: One AXEON-1000-HF5 4021 membrane element. The highest flow membrane for maximum rejection 98.5% nominal (96% minmum of impurities.

Stage 1: Sediment Filter High Flow pleated sediment filter, washable and reusable.

Stage 2: Carbon Block 5 Mic - Chlorine, VOCs Removal

Stage 3: RO Membrane Low Pressure (80 PSI) 1000 GPD

Membrane Flush Valve: for easy cleaning and significant extension of membrane life.

Test Conditions: Permeate flow and salt rejection based on 550 ppm, 80 psi, 77°F (25°C), pH 7, and 50% recovery

Note: Higher TDS and/or lower temperatures will reduce the system's production.

Membranes are tested at 77 degree Fahrenheit water temperature and 80 PSI water pressure (Best efficiency)

*If you have very hard water, to prevent scaling/fouling of membrane, pre-water treatment is recommended.