Whole House Water Filter 2 CU FT GAC Carbon UP flow Valve Bypass (1" Pipe Adapter)

Regular price $525.00

Shipping calculated at checkout.

Whole House Water Filter System GAC Carbon Up Flow Valve No Electricity Required 1" Pipe Connection 2 CU FT GAC Coconut Shell


UP Flow tank-style water filters works great. Tank-style non-backwashing filters are inexpensive, easy to set up, and easy to maintain.

They use no electricity and need no drain connection. Since there's nothing to wear out, they're virtually trouble free. They use exactly the same granular filter media — regular granular activated carbon that are used in our more expensive whole house back washing filters.

The main requirement for use of these whole house non-backwashing tank-style filters is clean water. If the objective is to remove chlorine from clean city water, a non-backwashing Upflow filter does an exceptional job. Unless the inlet water is very clean and free of rust and other sediment, we recommend that a cartridge-style sediment filter be installed in front of the filter tank.

The In/Out whole house carbon filters are efficient devices. They cost considerably less than their backwashing counterparts and require less maintenance. They save water — no back washing — and they do not require electricity.

With Up flow units, water simply enters the tank, passes through the tube, and flows out. There is no cleaning process. Non-backwashing tank filters are arranged so that the water being treated flows upward through the tank, entering at the bottom and exiting at the top. This reversed flow lifts the bed, keeps it fresh, and minimizes channeling. A special straining basket at the top of the tank prevents media loss.

The filters listed below are equipped with upflow valve. Estimated re-bed interval is every three years or so, depending on usage and chlorine content of your water.

This unit comes with:


1. Whole-House Filters or Point of Entry:

A whole-house filter is installed at a point on the home’s water supply plumbing that will result in treatment of all water that travels to any faucet or fixture in the home.

A whole-house filter system treats all water traveling to any faucet or fixture in the home. It removes the chemical before it can be ingested, breathed in, or absorbed by the skin during washing or bathing


Carbon is a substance that has a long history of being used to absorb impurities and is perhaps the most powerful absorbent known to man. One pound of carbon contains a surface area of roughly 125 acres and can absorb literally thousands of different chemicals. Activated carbon which has a slight electro-positive charge added to it, making it even more attractive to chemicals and impurities. As the water passes over the positively charged carbon surface, the negative ions of the of the contaminants are drawn to the surface of the carbon granules. Activated carbon filters used for home water treatment typically contain either granular activated carbon or powdered block carbon. Although both are effective, carbon block filters generally have a higher contaminant removal ratio. The two most important factors affecting the efficiency of activated carbon filtration are the amount of carbon in the unit and the amount of time the contaminant spends in contact with it. The more carbon the better. Similarly, the lower the flow rate of the water, the more time contaminants will be in contact with the carbon, and the more absorption that will take place. Particle size also affects removal rates. The most common carbon types used in water filtration are bituminous, wood, and coconut shell carbons. While coconut shell carbon typically costs 20% more than the others, it is generally regarded as the most effective of the three. All of our activated carbon filters use coconut shell carbon. There are two principal mechanisms by which activated carbon removes contaminants from water; absorption, and catalytic reduction, a process involving the attraction of negatively-charged contaminants ions to the positively-charged activated carbon. Organic compounds are removed by absorption and residual disinfectants such as chlorine and chloramines are removed by catalytic reduction. Activated carbon filtration is very common in a number of home water treatment systems. It can be used as a stand alone filter to reduce or eliminate bad tastes and odors, chlorine, and many organic contaminants in municipal (pre-treated or chlorinated) water supplies to produce a significantly improved drinking water. Activated carbon filters remove/reduce many volatile organic chemicals (VOC), pesticides and herbicides, as well as chlorine, benzene, trihalomethane (THM) compounds, radon, solvents and hundreds of other man-made chemicals found in tap water.
Up Flow Carbon Filter Systems
Installing an up flow non backwashing carbon filter is an easy, cost effect way to remove chlorine, taste and odor from city water. These up flow filters are simple to install and do not need electricity or drain connections to function. It works by forcing water through the middle of the tank and filters thorough the carbon media from underneath, raising media to counter formation of channels.


Whole House Water Filtration

This unit includes the following:

1 - 1252 FRP Tank (Color Varies

1 - Clack Up Flow Valve

1 - Bypass Valve

1 - 1" Pipe connector

1 - 1" Pipe Connection Adapter

Tanks are shipped preloaded with media

 Good Economical Whole House GAC Carbon Water Filter System.